android with opensolaris

HT03-AをUSBでopensolarisに接続すると、
認識はできて、読み書きもできるが。。。

その後、、、

androidがSDカードの破損を検出するw

ただ、androidでSDカードの破損を検出した後でも、
opensolarisに接続すれば読み書きできる。。。何ソレ。

androidは 1.6

$ uname -a
SunOS opensolaris 5.11 snv_111b i86pc i386 i86pc Solaris

$ dmesg
Jan 25 21:59:18 opensolaris usba: [ID 912658 kern.info] USB 1.2 device (usbbb4,c01) operating at hi speed (USB 2.x) on USB 2.0 root hub: storage@1, scsa2usb1 at bus address 3
Jan 25 21:59:18 opensolaris usba: [ID 349649 kern.info] HTC Android Phone HT96MLF03039
Jan 25 21:59:18 opensolaris genunix: [ID 936769 kern.info] scsa2usb1 is /pci@0,0/pci8086,7270@1d,7/storage@1
Jan 25 21:59:18 opensolaris genunix: [ID 408114 kern.info] /pci@0,0/pci8086,7270@1d,7/storage@1 (scsa2usb1) online
Jan 25 21:59:18 opensolaris asy: [ID 267298 kern.notice] asy0: UART @ 3f8 scratch register: expected 0x5a, got 0xff
Jan 25 21:59:18 opensolaris asy: [ID 702181 kern.notice] Cannot identify UART chip at 3f8
Jan 25 21:59:18 opensolaris scsi: [ID 583861 kern.info] sd6 at scsa2usb1: target 0 lun 0
Jan 25 21:59:18 opensolaris genunix: [ID 936769 kern.info] sd6 is /pci@0,0/pci8086,7270@1d,7/storage@1/disk@0,0
Jan 25 21:59:18 opensolaris genunix: [ID 408114 kern.info] /pci@0,0/pci8086,7270@1d,7/storage@1/disk@0,0 (sd6) online
Jan 25 21:59:18 opensolaris genunix: [ID 314293 kern.info] device pci8086,27a2@2(display#0) keeps up device sd@0,0(disk#6), but the latter is not power managed
Jan 25 21:59:18 opensolaris pcplusmp: [ID 805372 kern.info] pcplusmp: ide (ata) instance 1 irq 0xf vector 0x41 ioapic 0x1 intin 0xf is bound to cpu 1
Jan 25 21:59:18 opensolaris unix: [ID 954099 kern.info] NOTICE: IRQ19 is being shared by drivers with different interrupt levels.
Jan 25 21:59:18 opensolaris This may result in reduced system performance.
Jan 25 21:59:18 opensolaris usba: [ID 723738 kern.info] /pci@0,0/pci8086,7270@1d,2/input@2 (hid0): hid_attach: Unsupported HID device